How to Clean Mould with a Steam Cleaner

Mould can be a real nuisance to deal with, but it doesn’t have to stay that way. Cleaning mould with a steam cleaner is an easy and effective way of getting rid of this pesky problem. If you’ve ever wondered how to get rid of mould quickly and easily, then look no further. In this blog post, we’ll show you exactly how to clean mould with a steam cleaner so that your home or garden stays free from any unsightly patches for longer. We’ll cover everything from what is Mould? To why use a Steam Cleaner?, Preparing to Clean, Cleaning with the Steam Cleaner and Aftercare tips – all without needing an exclamation mark in sight.

Table of Contents:

What is Mould?

Mould is a type of fungus that grows in damp and humid environments. It can be found on walls, ceilings, floors, carpets and furniture. Mould spores are released into the air and when inhaled, can cause serious health problems such as asthma, allergies or even respiratory infections.

Mould thrives in warm temperatures and high humidity levels so it’s important to keep your home well ventilated by opening windows regularly or using an extractor fan if you have one installed. If you notice any signs of mould growth, then it should be dealt with immediately before it has time to spread further throughout your home.

One way to prevent mould from growing is to use a steam cleaner which works by releasing hot steam onto surfaces at high pressure killing off any bacteria present, including mould spores. The heat also helps dry out damp areas making them less likely for future mould growth as well as removing existing patches of mould without having to resort to harsh chemicals or scrubbing vigorously with a brush which could damage the surface being cleaned.

Steam cleaners are also great for cleaning hard-to-reach places like grout lines between tiles where dirt and dust accumulate over time, providing ideal conditions for mould growth if not removed regularly enough. Steam cleaners can reach deep down into these tight spaces quickly, eliminating the need for manual scrubbing, which would take much longer and may not even get rid of all the dirt anyway.

Key Takeaway: Steam cleaners are an effective way to remove mould and prevent future growth, as they release hot steam at high pressure to kill bacteria and dry out damp areas. They can also reach hard-to-reach places like grout lines quickly, eliminating the need for manual scrubbing.

Why Use a Steam Cleaner?

Mould is a common problem in many homes, especially those with high humidity levels. It can cause health problems and damage to surfaces if left untreated. Steam cleaning is an effective way of removing mould from walls, floors and other surfaces without the need for harsh chemicals or abrasive scrubbing.

Steam cleaners use pressurised hot water vapour to remove dirt, grime and mould spores from surfaces quickly and easily. The steam penetrates deep into porous materials such as wood, tile grout and fabrics to loosen dirt particles that are difficult to reach with traditional cleaning methods. The heat also kills bacteria on contact which helps prevent the spread of germs around your home.

Using a steam cleaner is much safer than using chemical-based products as there are no fumes or residue left behind after use. This makes it ideal for people who suffer from allergies or asthma, as they won’t be exposed to any harmful toxins when using a steam cleaner in their home.

Another benefit of using a steam cleaner is that it requires minimal effort compared to manual scrubbing or wiping down surfaces with detergents or bleach solutions. All you have to do is fill up the tank with water, plug it in and start steaming away. There’s no need for expensive tools either – most models come equipped with attachments like brushes, squeegees and hoses so you can clean hard-to-reach areas easily without having to buy extra equipment separately.

Finally, steam cleaners are better for the environment as they don’t require any harsh chemicals. This means that not only will you save money by not having to buy costly cleaning supplies, but you’ll also be helping reduce your carbon footprint at the same time – a win-win situation.

Using a steam cleaner is an effective and efficient way to clean mould from your home or garden, but it’s important to properly prepare before beginning the cleaning process.

Key Takeaway: Steam cleaning is an effective and safe way to remove mould from surfaces without the need for harsh chemicals. It requires minimal effort, saves money on expensive cleaning supplies, and helps reduce your carbon footprint.

Preparing to Clean

Before you begin cleaning mould with a steam cleaner, it’s important to prepare properly. This includes gathering the necessary supplies and protecting yourself from exposure.

First, make sure you have all the supplies needed for your job. You will need a steam cleaner, gloves, goggles or face mask, and cleaning cloths or sponges. It’s also helpful to have an extension cord if your power outlet is far away from where you are working.

Preparing the bathroom before steam cleaning

Next, take steps to protect yourself from exposure to mould spores while cleaning. Wear long sleeves and pants as well as rubber gloves and safety goggles or a face mask when handling mouldy items or surfaces. Additionally, open windows in the room where you are working so that air can circulate freely while using the steam cleaner.

Before beginning work, it is important to check that your steam cleaner is in good condition. Inspect hoses for cracks or tears, ensure seals around tanks are intact, make sure there aren’t any loose parts and confirm electrical cords are undamaged with no exposed wires showing through insulation material such as plastic sheathing on older models of machines. Additionally, all attachments should fit securely onto their respective parts of the machine before commencing cleaning.

Once you have gathered the necessary supplies and prepared your area, it’s time to start cleaning with a steam cleaner.

Cleaning with a Steam Cleaner

Cleaning with a steam cleaner is an effective way to remove mould from surfaces. Steam cleaners use hot water vapour to penetrate deep into porous materials, killing the mould and spores on contact. The process is simple: fill the machine’s tank with water, plug it in, and turn it on. Once heated up, you can start cleaning.

To get started, make sure that the area you’re cleaning is well-ventilated, as steam cleaners produce a lot of moisture which can cause condensation if not allowed to escape properly. Then attach the appropriate nozzle for your job – some nozzles are designed specifically for removing mould, while others are better suited for more general tasks like scrubbing floors or carpets.

Once you’ve got your nozzle attached and ready to go, move the steam cleaner slowly over any affected areas until they’re completely covered in hot vapour – this should take around 10 seconds per square foot of surface area. Make sure not to linger too long in one spot as this could damage certain materials, such as wood or wallpaper due to prolonged exposure to heat and moisture.

Using a steam cleaner to clean mould

When finished steaming an area, wipe away any remaining residue using a damp cloth or paper towel before moving on to another section of your home or garden furniture piece(s). Be careful when wiping down surfaces though; don’t rub too hard as this could spread mould spores elsewhere. After all sections have been wiped clean and dried off thoroughly (preferably with a fan), you’ll be left with fresh looking furniture free from pesky mould spots.

Steam cleaners are great tools for tackling tough jobs like getting rid of stubborn mould, but remember that prevention is key when it comes to keeping your home clean and healthy. Regular vacuuming and dusting will help keep these unwelcome guests at bay, so make sure you stay vigilant about maintenance.

Using a steam cleaner is an effective way to remove mould from hard surfaces, but it’s important to take the necessary steps afterwards to ensure the area stays clean and mould-free. In the next section, we’ll look at how you can maintain your home after cleaning with a steam cleaner.

Key Takeaway: Steam cleaners are a great way to remove mould from surfaces, but regular maintenance is key for prevention. To use one safely: fill the tank with water, attach an appropriate nozzle, steam for 10 seconds per square foot of surface area and wipe away any residue before drying thoroughly.


Aftercare is an important step when it comes to cleaning mould with a steam cleaner. It’s essential to ensure that the area is properly aired out and protected from future growth.

Once you’ve finished using your steam cleaner, open any windows or doors in the room to allow for proper ventilation. This will help reduce humidity levels and prevent further mould growth. If possible, use fans or dehumidifiers to speed up the drying process.

You should also inspect the area for any remaining traces of mould before leaving it unsupervised. If you find any, repeat the cleaning process until all signs of mould are gone. To avoid having to do this again in future, consider applying a sealant or paint over affected areas once they’re dry and free from contamination.

It’s also important to take steps towards preventing future outbreaks of mould in your home by controlling moisture levels as much as possible. Make sure bathrooms are well ventilated after showering and keep lids on containers such as buckets and bins where water can collect easily if left uncovered overnight or during periods of heavy rain outside. You may also want to invest in a dehumidifier if you live in an especially humid climate or have damp walls due to condensation build-up inside your home – these devices can help absorb excess moisture from indoor air quickly and efficiently without taking up too much space indoors either.

Finally, remember that regular maintenance is key when it comes to keeping your home free from unwanted contaminants like mould, so don’t forget to inspect rooms periodically throughout each year in case something has been missed previously.

Key Takeaway: Mould can be removed from surfaces with a steam cleaner, but it is important to take preventative steps afterwards, such as: opening windows and using dehumidifiers; inspecting for remaining mould; applying sealant or paint; controlling moisture levels; and regular maintenance.


Using a steam cleaner to clean mould is an effective and efficient way of removing stubborn substances from your home. Not only does it get rid of mould quickly, but it also helps prevent further growth. By following the steps outlined in this blog post, you can easily clean mould with a steam cleaner and keep your home looking fresh and healthy. So don’t wait any longer – grab that steam cleaner and start tackling those pesky patches of mould today.

Leave a Reply

Your email address will not be published. Required fields are marked *