how to convert a pressure washer into a sewer jetter

Are you looking for a way to make your pressure washer more useful? Why not learn how to convert a pressure washer into a sewer jetter. A sewer jetter is an incredibly powerful cleaning tool that can help you tackle tough jobs around the home and garden. Not only does converting your pressure washer save money, but it also offers numerous benefits over traditional methods of cleaning drains and pipes. In this blog post, we’ll explain what a sewer jetter is, why converting your pressure washer makes sense, how to do it yourself and tips on using one safely. So if you’re ready to get started with transforming your trusty old powerwasher into an effective drain cleaner.

Table of Contents:

What is a Sewer Jetter?

A sewer jetter is a specialised tool used to clean out clogged drains and pipes. It is similar to a pressure washer, but with the added ability to shoot water at high pressure in order to break up blockages and debris. The nozzle of the sewer jetter has several small holes that spray jets of water into the pipe or drain, which can help dislodge any built-up material such as grease, hair, soap scum or other debris.

The most common type of sewer jetters are powered by either electric motors or gasoline engines. They typically come with an adjustable nozzle so you can adjust the angle and intensity of the water stream depending on what needs cleaning. Sewer jetters also have long hoses that allow them to reach deep into pipes and drains for maximum effectiveness.

a big equipment for cleaning

Sewer jetting offers many advantages over traditional methods like plungers or chemical cleaners when it comes to unclogging drains and pipes. For one thing, it’s much faster than manually trying to remove blockages with a plunger or snake – all you need is access to a power source (electricity/gasoline) and you’re good to go. Additionally, since it uses pressurised water instead of harsh chemicals like bleach or lye, there’s no risk of damaging your plumbing system in the process.

With the right setup, you can even convert your pressure washer into a sewer jetter for more effective results – let’s take a look at the benefits of doing so.

Key Takeaway: Sewer jetters offer a faster, more cost-effective solution to unclogging drains and pipes than traditional methods. Benefits include no risk of damaging plumbing, adjustable nozzle for different blockages, long hoses for deep cleaning, and less time & effort needed.

Benefits of Converting a Pressure Washer into a Sewer Jetter

It uses high-pressure water jets to blast away dirt, debris, and blockages from pipes. This makes it an ideal choice for unclogging stubborn clogs or cleaning out grease buildup in kitchen sinks.

One of the biggest benefits of using a sewer jetter over a pressure washer is its ability to reach further into the pipe system than traditional methods. With the right nozzle attachment, you can easily access hard-to-reach areas such as bends and turns in the piping system without having to physically enter them yourself. This means less time spent on repairs and more time saved overall.

Another advantage of using a sewer jetter is its ability to clear out larger blockages quickly and efficiently. The high-pressure water jets are able to break up large chunks of material such as tree roots or other organic matter that may have caused blockages in your pipes without damaging them further.

The power behind these machines also allows them to tackle tough jobs with ease – even those involving grease buildups which can be difficult for traditional drain cleaners or plungers alone. Sewer jetters are also capable of reaching deeper down into pipelines than regular plumbing snakes, making them perfect for clearing out deep clogs like those found in main lines leading directly from your home’s foundation walls where regular snaking cannot reach due their size limitations..

Finally, when compared with chemical drain cleaners, sewer jetters offer an eco-friendly solution since they don’t use any harsh chemicals that could potentially damage your pipes or septic systems over time if used too often – something that isn’t always guaranteed with chemical solutions. All this adds up to make converting your pressure washer into a sewer jetter an easy decision when it comes tackling tough jobs around the house.

Converting a pressure washer into a sewer jetter offers many advantages, such as increased power and improved cleaning ability. In the next section, we’ll look at how to convert your pressure washer into a sewer jetter.

Key Takeaway: Sewer jetters offer an eco-friendly solution for tough jobs around the house: they can reach deeper into pipes than traditional methods, quickly clear out large blockages, and don’t use harsh chemicals.

How to Convert Your Pressure Washer into a Sewer Jetter

Converting your pressure washer into a sewer jetter is a great way to tackle tough clogs and blockages in your home’s plumbing system. With the right tools and materials, you can easily transform your existing pressure washer into an effective sewer jetting machine.

To get started, you will need:

• A high-pressure hose with couplings for connecting to the pressure washer gun or lance.

• A nozzle specifically designed for use with a sewer jetter (available from most hardware stores).

• An adjustable nozzle that allows you to adjust the water flow rate and angle of attack on stubborn blockages.

• A backflow preventer valve which helps protect against any sewage backing up into your home’s plumbing system when using the sewer jetter.

• Protective gloves and safety glasses should also be worn while operating the machine as it produces powerful jets of water at very high pressures which could cause injury if not handled correctly.

Once all these items have been gathered, it’s time to start converting. Begin by disconnecting the existing hose from your pressure washer gun or lance, then attach one end of the new high-pressure hose with couplings onto this connection point before securing it tightly with a wrench or pliers. Next, attach one end of the adjustable nozzle onto this same connection point before tightening securely again using either a wrench or pliers depending on what type of fittings are used here. Finally, connect one end of the backflow preventer valve onto this same connection point before securing tightly once more – make sure all connections are secure so no leaks occur during operation.

Lastly, check for any leaks around all fittings before beginning work. If none are present then congratulations, you have successfully converted your ordinary pressure washer into an effective Sewer Jetter.

Now let’s look at some tips for using it safely and effectively.

Key Takeaway: You can easily convert your pressure washer into a sewer jetter with the right tools and materials: high-pressure hose, nozzle, adjustable nozzle, backflow preventer valve, gloves and safety glasses. Make sure all connections are secure to avoid leaks during operation.

Tips for Using Your Sewer Jetter

Using a sewer jetter is an efficient way to clear out clogged pipes and drains. However, it’s important to take the proper safety precautions when using one of these powerful machines. Here are some tips for using your sewer jetter safely and effectively:

1. Wear Protective Gear: Always wear protective gear such as gloves, goggles, and long sleeves when operating a sewer jetter. This will help protect you from any potential hazards that may arise while working with the machine.

2. Read the Manual: Before operating your sewer jetter, make sure you read through the manual thoroughly so that you understand how it works and what safety measures need to be taken while using it.

3. Check Hoses Regularly: It’s important to check all hoses regularly for signs of damage or wear-and-tear before each use of your sewer jetter in order to ensure its safe operation during use.

4. Use Specific Attachments: Make sure you only use attachments specifically designed for your particular model of pressure washer/sewer jetter in order to avoid damaging either the machine or yourself during operation due to improper fitment or compatibility issues between parts/attachments used on different models/brands.

water coming out of a device

5 . Monitor Pressure Levels: Be aware of pressure levels at all times when running a sewer jetter as too much pressure can cause serious injury if not monitored properly throughout its usage cycle. If necessary, adjust accordingly based on instructions provided by manufacturer guidelines.

6 . Keep Away From Electrical Sources: Never operate a sewer jeter near electrical sources as this could result in electric shock or other dangerous situations arising from contact with live wires, etc.

When storing your machine, always keep it away from direct sunlight and extreme temperatures which can cause damage over time if left unchecked. Additionally, store hoses neatly coiled up so they don’t become tangled during storage periods, as this could lead to unnecessary wear and tear over time.

FAQs in Relation to How to Convert a Pressure Washer Into a Sewer Jetter

Can I turn my pressure washer into a jetter?

Yes, you can turn your pressure washer into a jetter. All you need is the right nozzle and hose attachment to convert it. The nozzle should be designed for high-pressure water jets, while the hose needs to be long enough to reach where you want to clean. It’s important that both parts are rated for the same PSI as your pressure washer so they don’t get damaged or cause any safety issues. With these two components in place, you’ll have a powerful jetting tool at your disposal.

How do you attach a sewer jetter to a pressure washer?

Attaching a sewer jetter to a pressure washer is relatively straightforward. First, make sure the power of your pressure washer is compatible with the sewer jetter you have purchased. Next, connect the high-pressure hose from your pressure washer to the inlet on the sewer jetter. Then attach the outlet of the sewer jetter to your desired attachment – such as a lance or nozzle – and secure it with a clip or clamp. Finally, turn on both devices and check for any leaks before beginning work.


Converting a pressure washer into a sewer jetter is an easy and cost-effective way to get the job done. With the right tools, you can quickly and easily turn your pressure washer into a powerful sewer jetter that will help you tackle tough clogs in no time. Just remember to use safety precautions when using your new sewer jetter, as it can be quite powerful! Now that you know how to convert a pressure washer into a sewer jetter, there’s nothing stopping you from getting started on those pesky plumbing problems.

Leave a Reply

Your email address will not be published. Required fields are marked *