How to Cut a Kitchen Worktop With a Jigsaw

Kitchen worktops are often a focal point of any kitchen and it can be daunting to make changes, such as cutting them down to size. But don’t worry! With the right tools, know-how and patience, you’ll soon have that perfect fit for your kitchen space – all without having to call in an expensive professional. We’re going to show you how to cut a kitchen worktop with a jigsaw, so if you’ve been putting off this project, then now’s the time to get stuck in!

Table of Contents:

Gather the Right Tools

When it comes to cutting a kitchen worktop with a jigsaw, having the right tools is essential. Before you begin, make sure you have the following items:

1. Jigsaw – This is the main tool that will be used for cutting your worktop. Make sure to select one with an adjustable speed setting and a blade guard for safety purposes.

2. Clamps – These are necessary to keep your workpiece in place while you cut it. Choose clamps that can securely hold down your material without damaging it or causing any movement during cutting operations.

3. Measuring Tape – You’ll need this to measure out where exactly you want to cut on your worktop before starting up the jigsaw blade. Be sure to double-check all measurements before making any cuts.

4. Safety Glasses – Eye protection should always be worn when using power tools like a jigsaw, as small pieces of debris may fly off from time to time and cause potential injury if not wearing eye protection at all times while operating them.

By gathering these four items beforehand, you can ensure that your project runs smoothly and safely without any hiccups along the way. Having the right tools is essential for a successful outcome, so make sure to double-check all measurements before making any cuts and always wear eye protection when using power tools.

Before starting to cut the worktop, it is important to make sure you have all the necessary tools. Make sure you have a jigsaw, clamps, safety glasses and a tape measure before moving on to marking the cut line.

Mark the Cut Line

Measuring and marking the cut line on a worktop is an important step in any home improvement project. It’s essential to get it right, so you don’t end up with an uneven or ill-fitting surface. To begin, use a measuring tape to measure the area where you want your worktop to fit. Take into account any walls or other surfaces that will be adjacent to your new worktop when taking measurements.

Once you have determined the exact size of your desired worktop, mark out the cut line using a pencil and ruler. Make sure that all lines are straight and parallel; if they aren’t, then it could affect how well your finished product fits together with its surroundings. If possible, draw two lines – one for each side of the cut – as this will help ensure accuracy when cutting later on.

When marking out more complex shapes such as curves or circles, use a template made from cardboard or paper first before transferring them onto the material itself with a pencil or marker pen. This way, you can make sure everything looks symmetrical before committing to making permanent cuts in your material. Once marked out correctly and double-checked for accuracy, you can move on to cutting along these lines safely and confidently, knowing that everything should fit perfectly afterwards.

Once you have marked the cut line, it’s time to move on to the next step: cutting the worktop with a jigsaw.

Cutting the Worktop

Cutting the worktop is an essential part of any home improvement project. To ensure a clean, straight cut, it’s important to use the right tools and techniques. A jigsaw is one of the best tools for cutting through laminate or wood countertops.

Before you begin, make sure your work area is well-lit and clear of clutter. It’s also important to wear safety glasses when using power tools like a jigsaw.

To start cutting your worktop with a jigsaw:

1) Gather the Right Tools: Make sure you have all necessary supplies on hand before beginning – this includes your jigsaw, blades designed for laminate or wood (depending on what type of material you are working with), measuring tape, pencil/marker and clamps (if needed).

2) Mark the Cut Line: Measure twice and mark once. Use a measuring tape to measure out where you want to make your cut line, then use a marker or pencil to draw it onto the surface of your worktop. This will help guide you as you make cuts along that line later on in the process.

Cutting a kitchen worktop using a jigsaw

3) Cutting The Worktop: Securely clamp down your workpiece so that it doesn’t move while making cuts with a jigsaw; this will help keep everything steady and prevent splintering from occurring during cutting. When ready, turn on your saw blade at low speed, then slowly follow along marked lines until desired depth has been reached – be careful not to go too deep as this can cause damage. If possible, try using two hands when operating the tool – one hand should be holding the handle while the other guides the blade along marked lines for more precise control over movement direction/speed etc. Once finished with the first side, flip the piece over & repeat the same steps until both sides have been completed successfully.

After completing all cuts, remove the clamps and check the edges for any rough spots which may need sanding down before finishing up the project completely. If there are any irregularities present, they can easily be smoothed out by running sandpaper lightly across them until desired results are achieved.

Key Takeaway: A jigsaw is the best tool for cutting a kitchen worktop, but make sure to wear safety glasses and use clamps when making cuts. Measure twice, mark once and sand any rough spots afterwards.

Finishing Touches

Sanding down any rough edges or splinters that may have occurred during cutting is an important part of the process when it comes to home and garden projects. It’s not only essential for achieving a professional finish but also for ensuring your safety.

Gather the Right Tools

You’ll need a few tools to get started with sanding down any rough edges or splinters you may have created while cutting. A sander, sandpaper, protective goggles and gloves are all must-haves when tackling this job. Make sure you choose the right type of sander depending on what material you’re working with – an orbital sander works best on wood surfaces, whereas a belt sander is better suited for metal surfaces.

Mark the Cut Line

Before starting to sand, make sure you mark out where exactly you want to cut so that there’s no confusion later on in the project. Use masking tape if necessary, as this will help keep everything neat and tidy while still allowing enough room for manoeuvring around tight corners and angles.

Cutting The Worktop

Once your cut line has been marked out, begin by using your chosen sander along the edge of it until all sharp edges have been smoothed off completely – don’t forget to wear protective goggles at all times. If there are any stubborn splinters left behind, then use some fine grit sandpaper instead before continuing onto step 4…

Finishing Touches

To finish up your project properly, it is important that you give everything one final once over with some medium grit sandpaper just to be safe; this will ensure that no nasty surprises pop up after painting or staining has taken place. Once finished, simply wipe away any dust particles using a damp cloth, and there you have it – perfect results every time.

Key Takeaway: Key takeaway: Sanding down any rough edges or splinters created during cutting is essential for achieving a professional finish and for safety. Tools needed include a sander, sandpaper, protective goggles and gloves; mark the cut line; use the sander along the edge of it; use fine grit sandpaper if necessary; give everything one final once over with medium grit sandpaper.


Cutting a kitchen worktop with a jigsaw is not as daunting as it may seem. With the right tools, careful marking of the cut line and steady cutting, you can achieve a professional-looking result in no time. Once you have completed your cuts, make sure to clean up any mess and check for any rough edges that need sanding down before using your newly cut worktop. Now you are ready to enjoy the fruits of your labour – happy cutting!

Leave a Reply

Your email address will not be published. Required fields are marked *