How to Cut a Circle in Wood with a Jigsaw

Creating the perfect circle in wood with a jigsaw can be tricky, but it doesn’t have to be. If you’re looking for an easy and precise way to cut circles into your wooden projects without having to buy expensive equipment or special tools, then look no further! This guide will provide all the steps needed on how to cut a circle in wood with a jigsaw – quickly and easily! From gathering supplies, marking out your desired shape, cutting along that line and finishing touches, this blog post has everything you need so you’ll never struggle again when creating beautiful circular designs from any type of timber. So let’s get started – it’s time to learn how to ‘cut a circle in wood with a jigsaw’ like an expert!

Table of Contents:

Gather Your Supplies

When aiming to cut a perfect circle in wood using a jigsaw, the initial and crucial step is to gather all the necessary supplies. Without the appropriate materials and tools, it will be challenging to complete the task accurately.

First things first, you will need a jigsaw that has an adjustable speed setting and can handle different types of blades. You should also have safety glasses on hand for protection from any flying debris or splinters.

Next up are your materials: you will need some scrap wood (plywood works best), some tracing paper, graphite paper, masking tape and a marker pen. For extra precision when marking out your circle shape onto the wood, use a compass or trammel points – this ensures that all sides of your cutout are even and symmetrical.

Finally, make sure you have the right type of blade for cutting through wood – preferably one with fine teeth so that it produces smooth edges without leaving too much sawdust behind. Also, keep in mind that if you’re using plywood, then opt for an HSS blade, as these work better than regular blades when cutting through multiple layers of material as plywood does.

Once everything is ready, it’s time to mark the circle on the wood, so you know where to cut.

Mark Your Circle

A piece of wood slab

There are a few various techniques you could use to mark a circle on wood. The most common and easiest way is to use a compass. A compass is essentially two pointed legs connected by an adjustable hinge with a pencil at one end and the other end used as a pivot point. To mark your circle, simply adjust the distance between the two points of the compass so that they match up with your desired radius size, then place the pivot point in the centre of where you want your circle to be drawn and draw around it.

If you don’t have access to or don’t feel comfortable using a compass, there are still plenty of ways for you to make sure that your circles come out perfectly round every time. One method is tracing – all you need is something circular (like an old plate or bowl) that’s slightly larger than what you want your finished product to be. Place this object onto your wood surface and trace around it until you have marked off exactly where your circle should go.

Finally, if none of these options works for whatever reason, try using masking tape instead. Measure how wide/long each side needs to be before cutting off pieces from each roll accordingly. Once everything has been cut into shape, lay them down on top of each other, so they form one large square (or rectangle, depending on what shape circle you’re trying to achieve). Connect all four corners together with more tape until everything forms into one cohesive unit – and there you have it. You now have yourself an easy-to-use template for making perfect circles without having access to many tools or materials beforehand.

Once you have marked your circle, it’s time to start cutting. Follow the next steps for guidance on how to use a jigsaw to cut through wood.

Key Takeaway: Making perfect circles in wood is easy with a few different methods: tracing, string art, and masking tape.

Cutting the Circle

Cutting a circle with a jigsaw is an easy task that can be done in just a few steps. To get started, you’ll need to gather your supplies: a jigsaw, safety glasses, and the material you plan on cutting. It’s also important to make sure your work area is clear of any obstructions, so you have plenty of room to manoeuvre.

Circular pieces of wood

Once all of your supplies are gathered, it’s time to mark the circle on the material. This can be done by using either freehand or with some type of template like cardboard or plastic sheeting. If using freehand, use a pencil and draw around the circumference until complete. For templates, trace along its edge for accuracy and precision when marking out the shape on your material.

Now that you’ve marked out where you want to cut, it’s time to start sawing. Put on your safety glasses before beginning, as this will protect your eyes from flying debris during cutting operations. Start at one end of the line and slowly guide the blade along until reaching back at the starting point – making sure not to press too hard as this could cause binding, which would result in an uneven cut or even breakage in extreme cases.

When sawing through thicker materials such as wood or metal, it is best practice to go slow and steady rather than trying to rush through it. Doing so will help keep cuts straight while avoiding kickback from sudden stops/starts due to excessive pressure being applied during operation, which could lead to potential injury. Additionally, try tilting the blade slightly outward away from the centerline while sawing; this helps reduce friction between blade teeth and material surface, resulting in smoother edges overall once finished cutting.

Key Takeaway: Cutting a circle with a jigsaw is an easy task that can be done in just a few steps: gather supplies, mark the shape onto the material, put on safety glasses and start sawing slowly. Tilting the blade slightly outward away from centerline while sawing helps reduce friction for smoother edges.

Finishing Touches

a artisan doing woodcutting high angle

Once you have cut your circle, it is time to finish the job. Sanding is a great way to smooth out any rough edges or imperfections in your circle. Start with a coarse grit sandpaper and work your way up to finer grits until you are satisfied with the results. You can also use an orbital sander for larger circles, as this will make quick work of the task at hand. If you do not have access to an orbital sander, then using manual sanding techniques should be sufficient enough for most projects.

When sanding, always remember that safety comes first. Wear protective goggles and gloves when working with power tools or abrasive materials such as sandpaper and steel wool. Additionally, if possible, try to keep dust particles away from yourself by using a vacuum cleaner or air compressor while working on your project.

You may also want to consider applying some sort of sealant or varnish after completing the sanding process in order to protect against moisture damage and give it a nice glossy finish. This step is especially important if you plan on displaying the finished product outdoors, where it could be exposed to harsh weather conditions such as rain and snowfall over time which could potentially cause wear-and-tear on its surface area due to water absorption into wood fibres, etcetera…

Key Takeaway: Sanding and sealing are essential for creating a smooth, glossy finish to your circle cut in wood with a jigsaw. Safety should always be the priority when working with power tools or abrasive materials. List of steps: 1) Sand using coarse grit sandpaper and work up to finer grits; 2) Apply sealant varnish.


Cutting a perfect circle in wood with a jigsaw is an achievable task, and now you know how to do it! With the right supplies, marking your circle correctly, and taking care when cutting it out, you can create beautiful shapes for all kinds of projects. Now that you have the knowledge on how to cut a circle in wood with a jigsaw, why not get creative and make something special?

Leave a Reply

Your email address will not be published. Required fields are marked *